Silage Cutter and Recycling Machine

Silage cutter and recycling machine is a cutter machine with a big recycling box, which is professional to crush the corn stalk and recover it into the recycling box. Cut corn stalk can be stored as silage to feed animals. The machine is matched with the tractor. This is a set of silage cutting, mincing, kneading, throwing, loading, and other functions machine. It realizes completely off-line harvest operation, with no restriction of line, simple structure, reliable performance, good operation, easy maintenance, and high efficiency. It is suitable for the harvest of silage or yellow silage, including corn stalk, sunflower, cotton stalk, sorghum, and other high stalk crops in the wax-ripening stage and full ripening stage. It’s welcomed by many customers from Indonesia, the Philippines, Singapore, Ecuador, etc.

We provide different models with different cutting widths, 1m, 1.3m, 1.5m, 1.65, 1.8m, 2m, 2.2m, 2.4m.

Working Video of Silage Cutter and Recycling Machine

Parameter of 1.3m Cutting Width Machine

Model		TZ-1300
Power	With recycling box	≥70hp
	Without recycling box	≥40hp
Working efficiency		0.7-0.9 acre /h
Cutting width		1300mm
Quantity of blades		32 pcs
Size		1.3*1.65*1.1 m
Weight		1100kg

Horsepower Parameter of Machines with Fitted Tractor

Cutting width	With Recycling basket or not	Horsepower of tractor
1m	Yes	≥60hp
	No	≥35hp
1.3m	Yes	≥70hp
	No	≥40hp
1.5m	Yes	≥75hp
	No	≥50hp
1.65m	Yes	≥90hp
	No	≥55hp
1.8m	Yes	≥100hp
	No	≥60hp
2m	Yes	≥110hp
	No	≥70hp
2.2m	No	≥75hp
2.4m	No	≥90hp

Structure Introduction of Silage Harvester and Recycling Machine

The machine is mainly composed of cutting and crushing chamber, crushed stalk recycling box, outlet, hydraulic automatic unloading device, and fan. It’s matched with a tractor with PTO (power take-off) device.

Working Principle

Operation Introduction

1. When working, adjust the straw harvester to the height of 20-50cm from the ground (lifting position should not be too high, lest the angle of the universal joint is too large and cause damage). 
2. Connect the power supply output shaft and rotate 1-2 times. After a few minutes, hang up the work gear and slowly release the clutch.
3. At the same time, gradually adjust the hydraulic lifting handle to the same specific height as the required grass height.
4. During operation, according to the density of planting grass and tractor horsepower, respectively determine the number of lines and machine speed, to ensure normal operation.
5. Always pay attention to observe whether the outlet of the straw channel is clear. If the outlet is not spraying straw outward, stop immediately and check if the fan is blocked.
6. When Straw harvester is turning, should be the first to lift it, rotation and then put it down. Silage harvester in the process of taking off and landing should be kept stable, do not reverse when working.
7. During operation, remove weeds and other obstacles. The ground shall be reserved for 3-5 meters of space for the use of the machine.
8. If abnormal noise is heard during the operation, please stop the operation immediately. After everything is normal, continue the operation.
9. In the process of use, should always check the belt tightness, so as not to reduce the speed of the knife shaft, affect the quality of the crushing effect and belt wear.

Advantages of Stalk Cutting and Recycling Machine

1. Multifunctional. One machine can set harvesting, crushing, recycling in one, save human labor to a great extent. The users can also choose to allow crushed straw return to the filed again, which will improve the fertility of the land.
2. Technical use of hydraulic lifting and unloading device, with high automation.
3. The variety of available raw materials is abundant, not only corn stalk, but also sorghum stalk, sunflower, cotton stalk, and many other high stalk crops.
4. There are 8 kinds of cutting width alternatively. Farmer can choose the right type according to the size of your cornfield and the horsepower of your tractor.
5. The angle of outlet is adjustable. The silage with high humidity, the weight of it is heavier, the density is larger, will easily cause the output pipe to clog. But you can adjust the angle of outlet to let the wet straw come out more smoothly.
6. 32 pcs of blades will cut and crush stalk finely.    

Successful Case of Silage Cutter and Recycling Machine

In April this year, a customer from Ecuador sent an inquiry to us about silage crusher and recycling machine, in May he placed the order of 2 sets of 1.3m cutting width model. He bought these two, one for himself, one for his friend who also needed this machine. After receiving the item in July, he came to us again and ordered another 3 sets, all for his friends and clients. Because his local friends like and were satisfied with the effect of his machine and hoped to buy this machine from our company too. They appreciate us a lot for our enthusiastic service and the high quality of our machine.

FAQ